OSOM Access over Cunningham's Gap extended to 13/1/25

Info from TMR Heavy Vehicle Unit 18/4/24 

Class 1 OSOM heavy vehicles operating under a NHVR issued permit up to 7.5m wide and 60m long MAY CONTINUE to use the Cunninghams Gap alternate route between the hours of 8pm - 5am Monday to Friday (night travel only) through until 13 January 2025.

To support industry and OSOM movements during the Bremer River Bridge (westbound) remediation period, current conditions of operations will continue beyond Sunday 30 June 2024, for heavy vehicles on the Cunningham Highway travelling through the project site at Cunninghams Gap (between Tregony and Mount Edwards).

This approach will provide Class 1 OSOM combinations up to 4.5m in width and 35m in length to utilise the Cunningham Highway route through the project work site during daytime hours for the duration of the Cunninghams Gap reconstruction period.

Temporary short duration increased conditions of operation restrictions may apply after 13 January 2025 to OSOM movements, which if required will be communicated with notice (2 weeks).

Conditions of Operation

Oversize loads must email traffic.cunninghamsgap@mcilwain.com three days prior to travel to notify the project team of your intention to travel through the work site. 

Contact the project team on channel UHF40 if you require assistance to travel through the site. 

Please apply through the NHVR Portal for permits to access this route. 

Class 1 OSOM vehicles operating under the Multi-State Class 1 Load Carrying Vehicle Dimension Exemption Notice 2023 (No. 2) can continue to travel through the project site. 

You must check the Conditions of Operation Database before you start your journey.

Visit the QLDTraffic website, download the app or call 13 19 40 to report an incident or get real-time traffic reports.

For any further information, contact Gary 0418 736 802 or Lisa 0405 152 952.